Guides · Updated 2026-11-06 · 8 min read

How to Price 3D Printed Products: A Simple Cost Formula With Example

Many makers price prints by guessing or by copying competitors, then discover that they work for very little. A short formula that counts every cost gives you a floor price below which you lose money, and a margin on top for the time you spend. This guide builds that formula and works through an example.

The costs you need to count

  1. Material. Print weight in grams multiplied by the filament price per gram. Include supports, skirts and brims, not only the model. The slicer shows the total.
  2. Electricity. Average printer power in kilowatts multiplied by print hours and your price per kilowatt-hour. Heated beds and enclosures raise the average.
  3. Machine wear. Nozzles, belts, build plates and eventually the printer itself wear out. Spread the cost of the printer and spare parts over its expected printing hours to get a cost per hour.
  4. Failed prints. Some prints fail. Add a percentage allowance based on your own record, often 5–15%.
  5. Labour. Preparing the model, slicing, starting the print, removing supports, sanding, painting and packing take time. Pay yourself an hourly rate.
  6. Packaging and shipping materials. Boxes, tape, protective filling and labels.
  7. Platform and payment fees. Marketplaces and payment providers take a percentage, and some add a listing fee.

The formula

Cost per item = (material + electricity + machine wear + labour + packaging) × (1 + failure allowance)

Price = cost × (1 + markup) ÷ (1 − platform fee rate)

Worked example (illustrative numbers)

Assume a figurine of 60 g printed in 5 hours. All inputs below are examples; replace them with your own.

ItemCalculationAmount
Material60 g × 20 per kg1.20
Electricity0.12 kW × 5 h = 0.6 kWh × 0.20 per kWh0.12
Machine wear5 h × 0.30 per hour1.50
Labour15 min at 12 per hour3.00
PackagingBox and filling0.80
Subtotal6.62
Failure allowance10%0.66
Cost7.28

Note on electricity: an average draw of 120 W for 5 hours is 0.6 kWh; at an assumed 0.20 per kWh that is 0.12. With a 40% markup the target is 7.28 × 1.4 = 10.19. If the platform takes 8% of the sale price, divide by 0.92: the listing price is about 11.08.

Ways to lower cost without lowering quality

Pricing beyond cost

Cost is only the floor. Customers pay for design, finish and trust. Good previews raise perceived value: a clean turntable video and a close-up of the surface let buyers see what they get. See How to Make a 3D Model Turntable Video and How to Photograph 3D Prints. Check prices of similar items, but do not copy a competitor blindly because their costs and quality are different from yours.

Selling files instead of prints

If you sell digital models, there is no filament cost, but you spend time on design and testing. Decide the licence carefully; see 3D Model Licenses Explained. Offer a clear preview, accurate dimensions and print settings.

Checklist

  1. Weigh a few finished prints and compare with the slicer estimate.
  2. Track failures for a month to set a realistic allowance.
  3. Decide your hourly rate and stick to it.
  4. Recalculate when filament or electricity prices change.

Frequently asked questions

Should I charge by weight or by time?

Use both. Weight covers material, time covers machine and electricity. The formula above does this.

What markup is reasonable?

It depends on market and effort. Many sellers aim for at least 30–50% over cost to cover growth and the unpaid hours of designing and customer support.

Try it yourself: convert your own model to an MP4 video and preview images for free in your browser at STLtoMP4.com. Your files never leave your device.

Related guides

Browse all guides